Suppressor Height Sights: How Tall and Who Needs Them

Suppressor height sights are taller pistol sights that let you aim over a mounted suppressor and see your irons through most red dots.

Suppressor height sights, often sold as “suppressor/optic height” sights, are a front and rear iron sight set built taller than the factory pair so the front post still shows above a suppressor hanging off the muzzle. The distinction that matters is not the brand or the dots. It is height, and whether your sights clear the tube in front of them. Tall enough, you aim like normal. Too short, you aim at the back of your suppressor.

Safety note. Unload the pistol, lock the slide open and check the chamber before you change sights or mount a suppressor. Sight heights and prices come from each manufacturer’s own product page, read in November 2026, and manufacturers change models, so check the listing for your exact pistol. Suppressor ownership rules vary by state. No link on this site earns us a commission.

Thread a suppressor onto a Glock 19, bring it up on target and look down the slide. Where did the front sight go? It is still there, hiding behind a fat tube of aluminum and titanium that sits higher than the sight ever did. A 9mm pistol suppressor like the JK Armament RPX 9K runs 1.55 inches across, and a factory front sight is not built to see over that. So you have three choices: aim by feel, add a red dot, or swap in taller sights. Only one of those works when the battery dies at the worst possible moment (and it always picks the worst possible moment).

Suppressor Height Sights at a Glance

  • What they fix: a suppressor that blocks your factory front sight.
  • How tall: Trijicon’s Glock set stands 0.418 inch up front and 0.451 inch in back.
  • With a red dot: they show in the lower part of most slide-mounted dot windows, so you keep a backup.
  • Price: Trijicon lists its Glock night sight set at $160.
  • Install: Trijicon recommends a gunsmith, and so do I.
Assorted Trijicon firearm sights laid out on a rustic wooden workbench, with workshop tools in the background.
Standard sights are the typical low-profile iron sights found on most pistols for normal use. Suppressor-height sights are taller versions of those pistol sights, raised so you can still see and aim over a suppressor attached to the barrel.

Do You Need Suppressor Height Sights?

Suppressor height sights are taller-than-standard iron sights designed to clear the bulk of a suppressor mounted on the barrel. If you regularly run a suppressor on your pistol, they are often worth having so you can still see and align your sights over the can. They also serve as a practical backup on optics-ready pistols, allowing a usable co-witness with many red-dot sights so you can keep shooting if the optic fails or the battery dies. For shooters who want both suppressed capability and reliable iron-sight backup, suppressor-height sights solve both problems in one upgrade. They are not necessary for everyone. If you never shoot suppressed and don’t run a red-dot optic, standard-height sights are usually lighter, lower-profile, and less likely to snag or interfere with holsters. Taller sights can also make the pistol slightly more awkward to carry or draw, and some shooters simply prefer the cleaner look and lower line of the factory sights. In short, suppressor height sights make the most sense when you plan to use a suppressor or want a solid co-witness backup for a red dot—otherwise, the standard sights that came on the gun are typically all you need.
Do you need suppressor height sights? Find your setup
Your pistol setup Need them? Why
Iron sights plus a suppressor Yes The suppressor sits in front of the factory front sight and blocks it.
Red dot plus a suppressor Yes, for a backup The dot does the aiming; tall irons are what you use if the dot goes dark.
Red dot, no suppressor Often Factory sights usually hide under a slide-mounted dot; taller sights show through the window.
Iron sights, no suppressor No Your factory pair already does the job.

The rows describe a typical slide-mounted dot and a pistol suppressor on a threaded barrel. Dot windows and suppressor diameters differ, so line up your own pistol before you order.

What Are Suppressor Height Sights?

They are the same three-dot (or dot-and-notch) sight picture you already know, lifted up off the slide. Shooting Illustrated put the problem plainly: the mass of a suppressor can block out the front sight, and that wrecks your sight picture. The fix is not complicated. Raise the front post until it peeks over the tube, then raise the rear notch the same way so the two still line up. Nothing about how you aim changes, and that is the whole point. Front post in the rear notch, tops even, put it on the target. You are just looking over a hill now instead of a flat road.

How Tall Are Suppressor Height Sights?

Trijicon’s suppressor/optic height night sights for standard Glocks list a front sight 0.418 inch tall overall and a rear sight 0.451 inch tall overall. That is the most specific number I could get straight from a manufacturer, and it is a good yardstick for the category. For a general range, Silencer Shop puts typical suppressor height sights at 0.300 to 0.450 inch up front and 0.400 to 0.500 inch in back, against roughly 0.150 to 0.200 inch for a standard front sight. In plain terms, the front post about doubles in height. That sounds like a lot until you see how much tube is sitting out there.

Do They Work With a Red Dot?

Yes, and this is why plenty of people buy them who never plan to own a suppressor. A dot mounted on the slide sits higher than factory sights, so the factory sights disappear under the window. Taller sights rise into the lower part of the window, and you get a dot with irons right underneath it (shooters call that a co-witness). Why care? Batteries die, lenses fog in the rain and glass gets muddy. With tall irons you keep shooting. Without them you are holding a very expensive paperweight. Trijicon labels its set “suppressor/optic height” for exactly this reason: one set of sights covers both jobs.

Glock Suppressor Height Sights

Glock owners are the biggest crowd asking about these, which makes sense, because the threaded-barrel Glock is the pistol most people put a suppressor on first. The Trijicon set I quoted fits a long list of standard Glocks, including the 17, 19, 22, 23, 26, 34 and 45 (check the listing for the full list, since the slim Glock 42, 43 and 48 family uses different sights). Trijicon lists that night sight set at $160.

Where to Buy

Dealers sell the same set for less. On November 19, 2026, five online dealers listed it at:

Trijicon GL201-C-600649 at five online dealers (checked Nov. 19, 2026)
DealerPriceStock
EuroOptic$101.99In stock
Brownells$114.99In stock
MidwayUSA$137.99In stock
OpticsPlanet$139.99In stock
LA Police Gear$142.99Ships from the manufacturer
The sights you pick should match the suppressor you run. A shorter, slimmer suppressor blocks less. A big fat one blocks more. Simple as that.
Springfield Armory suppressor height sites
Springfield Armory sells the XD-M Elite Co-Witness Suppressor Height Iron Sight Set on their store (store.springfield-armory.com), which are taller steel sights designed for XD, XD-M, and XD-M Elite pistols so you can aim over a suppressor or co-witness with a red-dot optic.

Installing Them

The rear sight drifts out of a dovetail on the slide, and on a Glock the front sight comes off with a small hex screw from underneath. That sounds easy on paper. In practice a rear sight that is tight in its dovetail needs a sight pusher to move it without chewing up the finish, and a hammer and punch is how most of those finishes get chewed. Trijicon recommends professional installation, and I would rather you pay a gunsmith for 15 minutes than buy a new slide. Once they are in, check your zero at the range before you trust them. Same goes for how the pistol shoots with the suppressor on. Point of impact can move, which our piece on whether a suppressor affects accuracy walks through.
Popular Suppressors reader poll
Which .22 would you put a suppressor on first?
Thanks, your vote is in. Results show here next week. Get them first in the Suppressor Brief: sign up free →
Last week’s results
Which Giving Thanks prize would you use first?
The JK Armament RPX 9K suppressor ★53%
The OA 2311 pistol18%
The BFR revolver18%
1,000 rounds of 9mm12%

The JK Armament RPX 9K suppressor wins at 53%. The OA 2311 pistol and the BFR revolver tie for second at 18% each.

Frequently Asked Questions

Do suppressor height sights work without a suppressor?

Yes. They are normal iron sights that happen to be taller, so the sight picture is the same with the suppressor on or off. The only difference you will see is that the sights stand higher above the slide.

Are suppressor height sights the same as optic height sights?

Mostly. Trijicon sells one set labeled “suppressor/optic height,” built to clear a suppressor and to show through a slide-mounted red dot. Other brands sell them under either name.

How much taller are suppressor height sights?

Silencer Shop puts a typical suppressor height front sight at 0.300 to 0.450 inch, against about 0.150 to 0.200 inch for a standard front sight. Trijicon’s Glock front sight is 0.418 inch tall overall.

Can I install suppressor height sights myself?

You can, with a sight pusher and the right hex driver, but Trijicon recommends professional installation. A gunsmith can do it quickly and check that the rear sight is centered and tight.

Do I need suppressor height sights with a red dot and a suppressor?

Not to aim, since the dot does that. You want them as a backup, so you can still aim if the dot fails or the lens gets wet or dirty. A suppressor makes your pistol quieter. Tall sights make sure it still points where you are looking. Buy the sights the same day you buy the threaded barrel, and you will never have to ask where your front sight went.

Sources: Trijicon, “Suppressor/Optic Height Night Sight Set for Glock, GL201-C-600649”; Silencer Shop, “Suppressor Height Sights”; Shooting Illustrated, “First Look: Meprolight R4E Tru-Dot Sights for Use With Suppressors”; Popular Suppressors, “JK Armament RPX 9K”.

Similar Posts

Share
James Nicholas

James Nicholas

07/02 NFA Firearms Manufacturer & Professional Gunsmith

The XDMAN has a talent for taking complex firearms subject matter and breaking it down into an easy-to-understand format that all experience levels can relate to. James is an 07/02 NFA Firearms Manufacturer, a Professional Gunsmith with over 20 years of experience, and a Firearms Writer, Photographer and Firearms Expert. Connect with him on Instagram, X, and Facebook as @therealxdman.